South Bend 14.5" Lathe with Taper Attachment Cross Feed Screw & Nut

South Bend 14.5" Lathe with Taper Attachment Cross Feed Screw & Nut

South Bend 14.5" Lathe with Taper Attachment Cross Feed Screw & Nut, AS483F3 (Form 978A) - For machines with ball thrust bearings, Screws that have large dials will not have the thru-hole drilled for mounting the dials either; this is done at installation,AS483F3 (Form 911J) - For machines without ball thrust bearings.Feed Screw & Nut South Bend 14.5" Lathe with Taper Attachment Cross,South Bend 14.5" Lathe with Taper Attachment Cross Feed Screw & Nut, Business & Industrial, CNC, Metalworking & Manufacturing, Metalworking Equipment, Metalworking Lathes.

South Bend 14.5/" Lathe with Taper Attachment Cross Feed Screw /& Nut
South Bend 14.5/" Lathe with Taper Attachment Cross Feed Screw /& Nut
South Bend 14.5/" Lathe with Taper Attachment Cross Feed Screw /& Nut

South Bend 14.5" Lathe with Taper Attachment Cross Feed Screw & Nut

South Bend 14.5" Lathe with Taper Attachment - Cross Feed Screw & Nut. AS483F3 (Form 911J) - For machines without ball thrust bearings. AS483F3 (Form 978A) - For machines with ball thrust bearings. Screws that have large dials will not have the thru-hole drilled for mounting the dials either; this is done at installation.. Condition:: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions : Model: : 14.5" Swing with Taper Attachment , MPN: : AS483F3: Country/Region of Manufacture: : United States , Brand: : South Bend Lathe: Custom Bundle: : No , Equipment Type: : Metalworking Lathes: Replacement Part Type: : Lathe Cross Slide Feed Screw , UPC: : Does not apply .

South Bend 14.5/" Lathe with Taper Attachment Cross Feed Screw /& Nut
South Bend 14.5/" Lathe with Taper Attachment Cross Feed Screw /& Nut
South Bend 14.5/" Lathe with Taper Attachment Cross Feed Screw /& Nut
South Bend 14.5/" Lathe with Taper Attachment Cross Feed Screw /& Nut
South Bend 14.5" Lathe with Taper Attachment Cross Feed Screw & Nut
AS483F3 (Form 978A) - For machines with ball thrust bearings, Screws that have large dials will not have the thru-hole drilled for mounting the dials either; this is done at installation,AS483F3 (Form 911J) - For machines without ball thrust bearings.